Tuesday, 14 April 2009

Dog Bed


Someone needed a new bed - there have been some flea issues recently, and winter is coming. I've read that raised pet beds help with both fleas (they live on the floor, and can only jump so high) and warmth. Emile seems pretty pleased with it. You can't see his smile in the photo, but I promise he's making happy noises! This bed's a lot easier to clean than his old floor cushion; a quick vacuum to pick up any biting critters, and a blanket that can be popped in the wash.

Here's how to make Emile's bed:

Gather (or buy) some planks. We used bits and pieces of an old futon base.
Scrabble in your toolbox for some screws and nails.
Find a roll of webbing - we used hessian.

Get your dog to sit still, or even better, lie still. Place the planks around him to see how much space he'll need for sleeping. Cut the planks to size. The bed should be around 8 inches high, so cut another 4 planks for the legs: 8 inches long, plus the height of the bed.

Drill holes and screw screws in at the corners, as many as you need to make a sturdy frame. Fasten the legs at each corner with more screws.

Mark the halfway point between each set of legs, then mark off equal spaces on each side of that mark, so you can attach the webbing evenly. Starting in the middle of one side, attach a piece of webbing with nails or a staple gun. Pull the webbing through to the opposite side, under the frame and up over the top. Ask the person helping you to pull the webbing as tight as possible, and attach it to the frame. (It's a good idea to lift the bed to pull the webbing tight, otherwise you might trap it under the frame and think it's tight when it's still slack.) Cut the strip of webbing, and repeat until you've done all the strips in that direction. Turn the bed 90 degrees and repeat for the cross strips. This time, attach one side, weave the new strip through the others, over and under, and then attach to the other side.



We did the strips evenly, leaving spaces between each piece, and then filled in the gaps with the left over webbing to make a more solid centre.

Throw a blanket on top, and recline...



Glue rubber or felt under the legs to protect the floor. (Rubber will also prevent the bed skidding when your dog jumps off; the skidding is apparently a little bit scary....)

25 comments:

  1. I love the "Dog Bed!" Having two boys I have had my fair share of houses and beds for rabbits, dogs, cats, hamsters, tortoises, birds and fish but this is definitely the best I've seen!

    ReplyDelete
  2. I remember seeing these advertised...and at the time I thought that if I was a better person, I would run a project that gets beds like these donated to an animal shelter like the SPCA.

    Just think how perfect. They have these poor chewed up plastic beds, with no pillows or anything.

    ReplyDelete
  3. Your dog looks very nice. Hey, you could sell those beds on etsy! wonder what the shipping cost would be...hmmmm. It needs a nice hand-printed pillow. :-)

    ReplyDelete
  4. Oh, this dog is so sweet! I am now positive that I need a puppy ... I have been dogless for about seven years, and really, life is so much sweeter with a doggy-breath on one's face. I even dreamt I had a little puppy two nights ago - which I take as a positive sign that I need to visit TEARS, I think ...

    ReplyDelete
  5. very clever! i tried some carpentry on the weekend (my never ending chair project) and have concluded that i am no carpenter. somewhat ironic i thought, being easter and all. :)

    ReplyDelete
  6. what a great idea! but with a 70 pound doggie and a 45 pound doggie and a small house, i may need to stick with the floor beds, to avoid shin banging! :)

    ReplyDelete
  7. Anonymous9:42 am

    Your 'how-to' illustrations are wonderful, as is the finished bed. Lucky Emile!

    ReplyDelete
  8. This is lovely, simple, & clean. Love it! I think it will be esp. helpful for those of us with shedding and/or longhair beasties. I definitely hate washing those enormous round beds.

    One question to anyone reading: how should this be modified to fit the weight of a heavier dog? And by "heavier" what I really mean is "German Shepherd". Will webbing do? If not, what's stronger that could be used in it's place?

    Cheers,
    AD

    ReplyDelete
  9. I've seen similar beds with the 'hammock' part made from heavy canvas nailed to the frame. Perhaps if you doubled up the canvas it would be strong enough?

    ReplyDelete
  10. webbing works for some pretty sturdy 'people chairs' and even a fold-out cot I have, so I imagine this would work fine for a large dog, as long as everything's attached really well.

    ReplyDelete
  11. Constantly doing something clever!

    ReplyDelete
  12. Love this. So simple but effective!

    ReplyDelete
  13. hah! i spotted this yesterday whilst reading craftzine blog - thought the model of the bed look familiar ;-) so cool - now i wish i had a dog.

    ReplyDelete
  14. I really like this bed, I plan to make one this weekend! thanks!

    ReplyDelete
  15. Your doggy is too cute...... I like your dog bed....Cool idea

    ReplyDelete
  16. My question... How do you stop the
    large dog (85 lbs) from stepping
    thru the sides between the webbing?

    ReplyDelete
  17. We manufacture a new innovation of dog beds which are on the same concept.

    • They are cost effective.
    • Great for dogs with hip dysplasia and arthritis.
    • They are raised off the floor for warmth and easy access and descent.
    • Hygienic, strong and durable.
    • Flea free.
    • Adjusts to dogs contour.
    • Waterproof.
    • UV Protected.
    • Easy to clean.
    • Comes in 3 different sizes but can be made to order.
    • Great for inside or outside.

    ReplyDelete
  18. Ann Sydney Australia2:55 am

    This is so good! I've been doing the internet circuit looking for the best option for our Chino. This project has now moved to priority status! Well done ...

    ReplyDelete
  19. What a sharp but practical project for this pet bed. I like that its simplicity allows you to make it as high or as low off the ground as your pet likes.

    ReplyDelete
  20. Wonderful, just what a blog it is! This blog has provided the helpful data to us continue the good work.
    dog beds amazon review

    ReplyDelete
  21. Anonymous10:04 am

    Nice post. I used to be checking constantly this weblog and I’m inspired! Very useful information particularly the ultimate section, I maintain such info a lot. I used to be looking for this certain info for a very long time. Thanks and best of luck, Click here FOr large dog beds

    ReplyDelete
  22. I need this article to complete my assignment in the college, and it has same topic with your article. Thanks, great share.
    aanrechtblad graniet

    ReplyDelete
  23. There are so many different aspects when it comes to this topic. Thank you so much for sharing your knowledge on this particular aspect.
    verhuizen gouda

    ReplyDelete
  24. I would imagine this would be cooler on hot days/nights than a floor cushion too

    ReplyDelete